Before you take your vehicle to a car bumper repair Sydney specialist, it is essential to know the type of bumper you have. No one pays attention to the type of bumper they have until when they hit something. Then all the attention goes to the bumpers. Every piece or part of a car serves a very important purpose. The car bumper exists to protect the car body and the driver by extension. Here are some types of car bumpers that you need to know.

Standard bumper

The standard bumper is meant for passenger vehicles and nothing else. The job of the bumper is to reduce low-impact damage to protect the exhaust and fuel systems as well as the cooling system of the car. It is also designed to protect the lights.

The standard bumper requirements for speed have changed every year according to the model of the car. Car models from 1972 to 1978 required no damage to the fuel system and headlights in a five mph collision on the front car bumpers and two and a half mph on the rear car bumpers. The requirements for collision damage went up after every few years until we have the five mph collision damage to fuel systems and lights today.

The present bumper standard is around sixteen to twenty inches above the ground and this applies only to passenger vehicles. This means that protection can be accomplished however car manufacturers choose. They do not have to comply with federal laws so they certify the car bumpers themselves. They aren’t required to disclose the figures but some do it on the car stickers.

Step bumper

This is another bumper you can take to your car bumper repair specialist to fix. It is made of aluminium, rubber, light metals or plastic. The bumper adds protection to low-speed impacts. Plastic bumpers have an extra polymer to strengthen the bumper so they are just as strong as their metal counterparts. The bumper comes with a cut-out in the shape of a step.

This type of bumper is found in SUVs, vans and trucks. It adds a lot of things to the vehicle. You can customise the bumper to meet your needs. Bumpers are often higher on passenger trucks due to off-road use. Their clearance should be higher when driving on steep roads.

Cowboy bumper

Some people confuse this bumper with a bull bar. Cowboy bumpers are installed beneath the bumper and rise in a tubular manner to meet the grille. They are made of heavy steel. The bumper protects the front car bumper. You can attach fog lights to your cowboy bumper.

Tube bumper

If you have a truck or jeep lifted with monster truck tires then you will need tube bumpers to reduce the damage in a crunch-up. These bumpers rarely get damaged so you do not have to worry about car bumper repair Sydney if you have them. These bumpers consist of a four-inch schedule forty pipes with fourteen gauge diamond plate steel skin.