:Whether you stay in a place that is prone to heavy rains or you want to protect your house against water damage, you will need a Sydney sump pumpto protect your home. A sump pump can be installed in your basement and works hard to keep your house dry from harmful water.

Over time, you may face unexpected challenges with your water pump – especially if it operates often. If your sump pump fails or malfunctions, you should follow the steps illustrated in this article to know how to fix it.

Wrong pump size pump

Choosing the wrong size is one of the most common problems with sump pumps. If you have a pump that is too large then it will end up working extremely hard than it has to and this can lead to wear and tear. As a result, the lifespan of your sump pump may shorten. Also, if your pump is too small then it might fill too quickly and will not be able to pump out the water properly. Your pump may burn out and even have a short lifespan. Choosing the wrong size system can have you calling for an unexpected emergency.

Improper installation of your pump

If you are in a desperate situation to know pump problems and solutions because your system isn’t acting normally, it may be because your sump pump rental was installed incorrectly. For example, if you hear the motor of your pump running but do not see water pumping then your technician may have forgotten to install a check valve on your discharge line whilst installing your pump.

If your pump pit was set in gravel or dirt, you might have a big problem. The placement can lead to unwanted debris entering your pump and causing clogs. Sump pumps clogged with sediment can malfunction.

An overworked pump

If you have recently experienced heavy rains, your pump may get overwhelmed by a heavy water flow. When your pump is overwhelmed, it can end up malfunctioning and break down. When it comes to problems with sump pumps, your best solution is to upgrade your pump to fit your needs. You may also want to consider using several pumps to deal with heavy storms.

A clogged pump

A clogged pump intake is one of the most common problems with sump pumps. You run the chance of encountering more pump clogs because of a lack of proper maintenance if your pump is lidless. With time, debris and dirt can build up within your pump. Pump clogs can be fixed by a professional. If necessary, you may need to replace your pump. Regular pump maintenance can keep your pump in great condition.

A clogged discharge line

This is another Sydney sump pump problem that you should watch out for. When your pump collects water, the water is often emptied through a discharge line. The discharge line expels water away from the property so you do not have to panic over potential damage. However, the lines can become frozen in cold water or can get clogged by debris and cause your pump to malfunction. You should ensure your discharge line is clear all the time.